Mike
- Total activity 1123
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 562
Articles
Recent activity by Mike-
Satcube Default WiFi Password
Documentation for the Satcube Ku: Default WiFi Password. The Satcube Ku weighs about 17 lbs, fits in a briefcase, and reaches broadband speeds within minutes of opening the lid, which is why broadc...
-
Satcube Cleaning and Maintenance
Documentation for the Satcube Ku: Cleaning and Maintenance. The Satcube Ku weighs about 17 lbs, fits in a briefcase, and reaches broadband speeds within minutes of opening the lid, which is why bro...
-
Satcube - Using an external modem
Using an external modem with the Satcube Ku Setup and configuration guide To use an external modem with the Satcube terminal, the modem should first be connected to the external interface on the b...
-
Satcube - Temperature Calibration
In some cases, very high/low temperatures affected the IMU which resulted in slight disparities in the pointing values. When doing a calibration in the 0.7.31 software, the IMU now takes the temper...
-
Satcube - Set static IP address
Set static IP Step 1. Go into Windows settings> Network & Internet. Step 2. Go to the ethernet tab> Change adapter options. Step 3.Right click on the option that is connected to the Satcube> P...
-
Satcube - RF Calibration
An RF calibration procedure has been added that can be used to enhance the RQ value. On some carriers with low C/N the RQ could be zero or close to zero, the RF calibration should make the RQ more ...
-
Satcube - OpenAMIP
OpenAMIP Is a protocol that enables the modem to talk to an antenna control unit in this case the terminal-embedded system. OpenAMIP requests the remote geolocation from the terminal. Using that i...
-
Satcube - How to enable transmission override
WE DO NOT RECOMMEND DISABLING THE TRANSMISSION SAFETY. However, in some few cases the user might want to transmit without fulfilling the normal transmission criteria. If tests are to be performed i...
-
Satcube - Data Sheet
Complete technical specifications for the Satcube Ku: dimensions, power, connectivity, and ratings. The Satcube Ku weighs about 17 lbs, fits in a briefcase, and reaches broadband speeds within minu...
-
Access Satcube Terminal Web gui (Interface)
Accessing the Satcube webgui is done either via option A: automatically allocated IP or option B: manually set IP. A. Accessing with automatically allocated IP (recommended) 1. Connect to the Satcu...